How To Take Measurements Of Windows

Table of contents:

How To Take Measurements Of Windows
How To Take Measurements Of Windows

Video: How To Take Measurements Of Windows

Video: How To Take Measurements Of Windows
Video: How To Measure For Replacement Windows 2024, March
Anonim

Currently, different options for measuring window openings are used. An important role in this is played by the type of house, the materials of the walls, as well as the exterior decoration of the building. When performing this work, you must be extremely careful.

How to take measurements of windows
How to take measurements of windows

Instructions

Step 1

Installation seams can be straight and angular. It depends on the configuration of the surface of the wall opening. Of course, experts should take measurements for the manufacture of windows. However, all the work can be done independently.

Step 2

If you live in a panel, block or brick house, then measurements must be taken along the outer slopes. To the obtained values, add 10-12 millimeters. This distance is necessary to "overlap" the window frame. The size may vary. It all depends on the characteristics of a particular opening.

Step 3

So, first, determine the dimensions of your opening - width and height. To calculate the width, it is necessary inside the apartment, along the windowsill, to measure the distance from one slope to another. Write down your result. Measure the width along the top slope. Double metering can help identify existing imbalances.

Step 4

The height of the window opening is measured inside the apartment, along one slope. Measure vertically from the sill to the upper slope. Also do the same along the second slope. Ideally, if all the obtained values are the same. Otherwise, the skew of this design is revealed.

Step 5

Measure from the street side. Compare them with those obtained during the measurement of the window inside the apartment. Such a comparison can help to identify the mechanical error and determine the thickness of the plaster layer, which will be needed for internal slopes.

Step 6

Measure the width of the slopes inside the apartment. To do this, you need to measure the depth of the window opening to the left or right - from the frame to the corner of the wall.

Step 7

Measure the depth of the low tide. The ebb is a special piece that is located on the street side of the window. It is necessary to drain rainwater and to protect the window from its penetration. It is necessary to measure from the frame to the corner of the wall.

Recommended: