How To Bend A Reinforced Plastic Pipe

Table of contents:

How To Bend A Reinforced Plastic Pipe
How To Bend A Reinforced Plastic Pipe

Video: How To Bend A Reinforced Plastic Pipe

Video: How To Bend A Reinforced Plastic Pipe
Video: How to Bend PVC Pipe - Mikes Inventions 2024, March
Anonim

Bending pipes is necessary when installing plumbing, heating devices, during pipe laying. If you were unable to buy ready-made pipes of the desired shape, you can bend them yourself.

How to bend a reinforced plastic pipe
How to bend a reinforced plastic pipe

Necessary

  • - stiff spring;
  • - wire;
  • - dry sand;
  • - plastic plugs;
  • - blowtorch;
  • - vice;
  • - pipe bender;
  • - a machine for bending pipes.

Instructions

Step 1

For pipes made of not too hard metal-plastic, the best option would be bending with a stiff spring. To do this, take a strong spring, attach a wire of such length to one of its ends so that by pulling on it, the spring can be pulled back. Slide it along the pipe to the place of the forthcoming bend. Make sure that the center of the spring is exactly in the middle of the bend. Bend the pipe smoothly, resting it on the knee. Pull on the wire and pull out the spring.

Step 2

You can bend the pipe using a wire. To do this, insert individual pieces of wire into the pipe until the entire gap is filled. Bend the pipe to the desired angle and pull out the wires one by one. This method allows you to make the bend as smooth as possible.

Step 3

And also the pipe can be bent by acting on it by heating. To do this, pour dry sand into the pipe so that there is no empty space at all. Close the ends with plastic plugs so that the sand does not spill out. Clamp the pipe in a vise at a distant distance from the place of heating. Mark the bend and heat it with a blowtorch. Bend the pipe to the desired angle. Open the plugs and remove the sand.

Step 4

You can also bend the pipe using a Volnov machine called a pipe bender. To do this, put the long part of the pipe under the clamp of the workbench, lubricate the place of the future bend with machine oil and bend its short side. With the help of a pipe bender, you can get such pipe shapes as "kalach", "staple" or "weft".

Step 5

A special machine, which can be purchased at a hardware store, will simplify the work of bending pipes. Set the required pipe bend angle on the machine, insert the plastic pipe into the machine and bring the ends of the handles together.

Recommended: