How To Install Wooden Doors

Table of contents:

How To Install Wooden Doors
How To Install Wooden Doors

Video: How To Install Wooden Doors

Video: How To Install Wooden Doors
Video: How To Install A New Door & Replace Fittings 2024, March
Anonim

When arranging the interior of an apartment, interior wooden doors are widely used. If you need to replace the door structure with a new one, there is no need to invite specialists for this. Installing wooden doors is quite within the power of a home craftsman who has basic skills in working with the most common tool.

How to install wooden doors
How to install wooden doors

Necessary

  • - knife;
  • - nails;
  • - self-tapping screws;
  • - a hammer;
  • - screwdriver;
  • - screwdriver;
  • - drill;
  • - door knob;
  • - door hinges;
  • - building level;
  • - roulette;
  • - ruler;
  • - pencil;
  • - polyurethane foam.

Instructions

Step 1

Remove the original packaging from the new door. Carefully open the package with a knife, being careful not to touch the surface of the door leaf, because scratches on the laminated or varnished coating will then be difficult to remove. Check the contents of the delivery. It usually includes the elements of the door frame and the door leaf itself. The accessories most often have to be purchased separately.

Step 2

Collect the elements of the door frame to make it look like the letter "P". It is important that the structure has the correct geometric shape without distortions. Very often, grooves and special plastic inserts are provided for connecting the elements of the box, which should be hammered into the technological holes with a hammer.

Step 3

Insert the assembled frame into the doorway for fitting. It is assumed that the old door with the same frame has already been previously dismantled. Make sure that nothing interferes with the installation of the new structure, and that its dimensions correspond to the opening, taking into account the technological clearances.

Step 4

Now fix the frame in the doorway completely, setting it to the building level. The posts and the top headroom must be perfectly flat, without distortions horizontally and vertically. Screw the frame parts to the doorway one by one using long self-tapping screws. Sink the heads of the fasteners into the wood and close them with matching plastic plugs. Fill the cracks between the box and the walls with polyurethane foam and seal it with platbands.

Step 5

Prepare the door leaf. If necessary, cut a lock into it, attach the door handle and hinges. For this part of the work, you will need a drill, drill, chisel and hammer. Be especially careful when installing the hinges. Sink them into the end of the canvas, having previously removed a layer of wood equal to the thickness of the plate. Ideally, if the hinges are flush with the end surface of the door leaf.

Step 6

On the box, mark the locations of the hinges and the slot for the tongue of the locking device. Make the corresponding grooves in these places. Hang the door leaf on the hinges and adjust its position so that the door opens and closes freely. Attach a counter plate to the door frame, which will include the lock tongue. This completes the door installation.

Recommended: