How To Make A Stretch Ceiling Yourself

Table of contents:

How To Make A Stretch Ceiling Yourself
How To Make A Stretch Ceiling Yourself

Video: How To Make A Stretch Ceiling Yourself

Video: How To Make A Stretch Ceiling Yourself
Video: how to make a do-it-yourself stretch ceiling / video training 2024, March
Anonim

Linen, silk and cotton, this is what stretch ceilings were made of in antiquity. Then they were forgotten, and in the twentieth century they remembered again and, of course, improved - now the ceiling can even enlarge the room. The glossy surface of the stretch ceiling, as it were, enlarges the room.

The glossy surface of the suspended ceilings increases the space
The glossy surface of the suspended ceilings increases the space

Instructions

Step 1

First, select the height at which the ceiling will be, then precisely place the marks on all four corners of the room, otherwise, when installing the ceiling, it will turn out to be crooked. Then take a lace, sprinkled with colored dust and at least as long as the wall. Use it to connect the marks on the corners of the room. Pull the string away from the wall and release it; the mark left on the wall will serve as a guide for installing the profiles.

The next step is to prepare the guide profiles. Measure the profile according to the size of the wall length, if it is longer, and in order not to suffer with corners on the walls, make an incision with a hacksaw in half and bend now it will go into any corner. Drill holes in the profile for screws with a pitch of 10 cm, then the ceiling will hold securely. Attach the profiles to the wall. If you have drywall walls, screws alone will not be enough. Make wedges with a length of 15 to 20 cm from the remains of the profile and use them to additionally strengthen the structure. Wedges are attached to the ceiling in such a way that they tightly press the profile against the wall. If this is not done, the ceiling may collapse. Do not forget about the profile joints, they are sealed with aluminum paper, otherwise the sharp edges will tear the material, however, this is quite simple to fix. If you accidentally cut the material and the cut is not large, take the patch, which is always included in the kit, spread it with superglue, attach it to the cut and after a couple of minutes there will be no trace of the cut.

Living room with false ceiling
Living room with false ceiling

Step 2

Now hang a clip in each corner and start unrolling the canvas of the future ceiling. Hang the corners of the canvas onto the clips. Then turn on the burner and warm up the web. Be careful, such a ceiling is very afraid of fire, so you can warm it up in one place for no more than 5 minutes, otherwise it will start to melt. You can also tear the matter to prevent this from happening, fix it gradually. At the beginning 10-15 cm on one wall, then move on to the other and do the same. So walk in circles until the ceiling is ready.

Now you can summarize.

Recommended: