How To Pick A Good Conditioner

Table of contents:

How To Pick A Good Conditioner
How To Pick A Good Conditioner

Video: How To Pick A Good Conditioner

Video: How To Pick A Good Conditioner
Video: How To Choose The RIGHT Shampoo & Conditioner For Your Hair Type 2024, March
Anonim

If you want the temperature in your house to depend not on the season or the weather, but solely on your desire and mood, then in this case, buying an air conditioner will be the ideal solution for you. Today, the range of climate systems observed in stores is extremely large and, naturally, such a choice can confuse an inexperienced person. In order not to make a mistake with the purchase and choose a good air conditioner, you need to know the key parameters on which all the technical characteristics of the device depend.

How to Pick a Good Conditioner
How to Pick a Good Conditioner

Instructions

Step 1

First you need to decide on the type of air conditioner:

Monoblock air conditioners consist of a compressor, condenser and evaporator, which are housed in one housing. Such devices, in turn, are divided into window and mobile. The first ones are mounted in the window opening with the help of special brackets. Mobile air conditioners consist of a block of equipment and a long duct, the end of which must be brought out into the street. Such a system draws hot air out of the room, and leaves cold air in the apartment.

Step 2

Split systems are the most popular type of home air conditioner. They are two separate blocks that are located inside and outside the room (a special frenovy pipeline is used for connection). This design will allow you to significantly reduce noise and increase productivity.

Step 3

Multisplit systems are used when it is extremely irrational to use conventional split systems, for example, in cottages, country houses, large apartments. Their main difference is that such a device consists of one external unit and several internal ones. Thanks to this design, you will be able to condition air in several rooms at once.

Step 4

After you decide on the type of air conditioner, you need to check the presence of an inverter. This device is designed to smoothly adjust the cooling power. Conventional air conditioners constantly operate at maximum power and when the room cools down to a certain temperature, they simply turn off. And inverter ones smoothly reduce power. In addition, another advantage of such an air conditioner is a reduction in energy consumption by about 40-50%.

Step 5

The most important characteristic of this device is the cooling power or its performance, measured in watts. Remember that any air conditioner is designed to work in a room with a certain area. Therefore, before buying, it is necessary to calculate the air conditioning. It is quite simple to do this: for every 10 sq. meters of area accounts for approximately 1 kW of equipment power. However, the ceiling height in this case should not exceed three meters. The final result needs to be adjusted by increasing the power depending on the number of household appliances, the intensity of the use of the room.

Step 6

It is also recommended to pay attention to the noise level of the air conditioner, it should be: for the indoor unit - 25-35 dB, and for the external one - 40-55 dB.

Recommended: