Beautiful And Modern Renovation Of Ceilings In The Apartment

Table of contents:

Beautiful And Modern Renovation Of Ceilings In The Apartment
Beautiful And Modern Renovation Of Ceilings In The Apartment

Video: Beautiful And Modern Renovation Of Ceilings In The Apartment

Video: Beautiful And Modern Renovation Of Ceilings In The Apartment
Video: Makeover: A Luxury Condo Reno 2024, March
Anonim

Slatted ceilings are a modern solution for the interior, which is characterized by a short installation time, aesthetics and environmental friendliness. As a basis, durable, strong and moisture resistant materials are used that can be combined with each other. Such ceiling systems are installed in two stages, the first of which involves the installation of the frame, the second - the installation of slats.

Beautiful and modern renovation of ceilings in the apartment
Beautiful and modern renovation of ceilings in the apartment

Rack systems for the ceiling can be made of plastic or metal. If you want to combine moisture resistance and complete fire safety, you should choose aluminum structures, in addition, their service life reaches several decades.

Preparatory stage

For work, you will need: pliers, dowels, self-tapping screws, tape measure, metal scissors, a set of slatted ceiling, a perforator, a knife and a screwdriver.

The slatted ceiling must be installed after leveling the walls. The distance between the ceiling and the ceiling when installing incandescent lamps should be 130 mm, if it is supposed to install LED or halogen equipment, this value should be reduced to 70 mm.

If the ceiling in the kitchen does not exceed 2.6 m, the ceiling space should be minimal. Fastening of stringers, which are longitudinal elements of the frame structure, should be carried out to the floor. If the room is narrow enough (no more than 2 m), stringers can be abandoned, then the slats should be fixed to wall corners, which should be fixed with screws and plastic dowels.

Stringers, or otherwise profiles, should be 5 mm less than the distance between opposite walls; they should be fixed to the ceiling surface with hangers or long self-tapping screws. The installation step of the fasteners should be 50-70 cm, the distance between the stringers should be equal to the limit of 70-150 cm. The extreme stringers should not be removed from the wall by more than 10 cm. To determine the horizontal position of their position, use a long level, and to correct them you need to apply the method of moving the clip or compressing / releasing the spring.

Installation of rack and pinion suspension system

The slats must be started to be mounted from the wall where the uncut panel will be located. In the next row, you need to measure the distance on the ceiling, which must be filled in order to cut the rail to the desired length, then it can be inserted and snapped into the grooves of the stringers.

In advance, you should determine the location of the recessed luminaires for which holes must be prepared. In the panels, they must be made before installation on the ceiling, for this it is necessary to select a cutter of the required diameter. Care should be taken to ensure that the hole is 1/2 the width of the strip. Once the slatted ceiling is fully installed, you can fill the grooves between the panels with special inserts.

Recommended: