How To Build In A Bathtub

Table of contents:

How To Build In A Bathtub
How To Build In A Bathtub

Video: How To Build In A Bathtub

Video: How To Build In A Bathtub
Video: concrete bathtub tutorial 2024, March
Anonim

You can replace an old bathtub or install a new one yourself if you cannot pay for the services of specialists or there is no company in your city that provides such services. In addition, there is nothing difficult in this process, unless you need help to move the container to the right place.

How to build in a bathtub
How to build in a bathtub

Necessary

Tape measure, piece of paper, pen, bathtub, support legs, siphon, construction silicone, ceramic tiles, tile mix, grout, drywall

Instructions

Step 1

Measure the bathroom with a tape measure and decide how you will install the bath. Most often, bathtubs are installed in a corner, sometimes right next to one wall.

Step 2

Choose a bathtub in a specialized store, focusing on the size of the room, as well as the location of the sewer pipe and utility networks of water taps.

Step 3

Once your purchase has been delivered, assemble the tub, legs and siphon. When installing the siphon, apply construction silicone to the cuffs and sealing washers located on the outside of the bathtub. When tightening the locking nuts, remove excess silicone with a sponge or cloth.

Step 4

Wait 24 hours for the silicone to cure. Previously, you cannot fill with water.

Step 5

Seal the joints using cement, which you can later paint with enamel so that it does not differ from the color of the bathroom.

Step 6

Once the bathtub is installed, you can completely cover it with ceramic tiles or plastic. Of course, the first option is more reliable and practical. But for laying the tiles, you need to prepare the base, while for the plastic, a pair of guides above and below is enough.

Step 7

So, in order to build the bath into the room and make it visually monolithic with the interior, prepare a solution for laying tiles and a base for it. Usually these are plasterboard walls.

Step 8

Having installed the drywall on the prepared guides, you can start laying the tiles.

Step 9

When the tile is lying, rub the seams with an airtight grout, which will protect the structure from leaking.

Recommended: