How To Choose A Shower

Table of contents:

How To Choose A Shower
How To Choose A Shower

Video: How To Choose A Shower

Video: How To Choose A Shower
Video: A Designer's Guide to Choosing Bathroom Tile 2024, March
Anonim

The shower cubicle perfectly complements the modern design and saves space in the bathroom. The choice is wide enough, it should be borne in mind that designs are round, square and rectangular, their size ranges from 70x70 cm and more. Cabins are simple and multifunctional, combined with a bath or with a built-in sauna.

How to choose a shower
How to choose a shower

Instructions

Step 1

Measure your bathroom. If space is tight, choose a small cab. It is best to take a square or rectangular model of at least 80x80 cm. So nothing will hinder your movements during washing. If the cockpit is not round but small, it will be difficult to turn around in it. Refer to trusted manufacturers, look on the Internet for reviews of the owners. Ask your dealer what the minimum accessories are. A hose, a watering can, a rod is required.

Step 2

Check the attachment of the shower head, usually the accessory is held on the rod using the holder. Try tilting it to any angle, even upside down. There are plastic and metal nozzles. The chrome finish darkens over time.

Step 3

Ask the seller to show you the device of the nozzle and explain how it works. There are several options for delivering a jet: regular rain, a soft jet saturated with air (good for washing long hair), a massage jet when only a few central holes work, and the pressure remains the same. An eco-jet will be especially needed if water meters are installed in the apartment. Turning on the turbo jet, you will see how the water will not pour out in a traditional rain, but hit in one powerful jet, which is indispensable for a hard massage.

Step 4

Read the instructions for the shower stall. If the cab is equipped with a self-cleaning function, it will be easier for you to use the structure. If not, ask what household chemicals you can use to clean.

Step 5

Choose a model based on the presence of a water saving system in it. Economy water cans are the cheapest, with one or two jet options. The middle class, equipped with different jet options, is twice as expensive, here is a more original design. Eco-jet will help save water, premium-class - three times more expensive than economy-class, but satisfies even high demands.

Step 6

Decide what kind of hose you want to use in the cab. Stronger - molded plastic, inside it there is a metal winding in a spiral that does not come into contact with water. Transparent raw materials - not suitable for use in Russia. Rust, lime will settle on the surface of the hose. Touch the part with your hands, the harder it is, the better.

Step 7

Ask what material the sash and pallet are made of. For this, impact-resistant plastic or tempered glass are used. If this is broken, there will be no sharp chips. The cost of such cabins is high, in addition, the plastic is short-lived: it becomes cloudy, and soap stains remain on it. Choose a tinted material or with a pattern - this way its aesthetic appearance will remain longer.

Step 8

Feel the pallet, it can be made of acrylic, marble or marble chips, faience, steel, enameled metal. Steel pallets are inexpensive and lightweight, but not strong and have a lot of flex. They are also very noisy when water falls. Enamelled trays have a disadvantage: the coating can chip off. Earthenware pallets are stable, but very easy to break. Marble ones do not make noise under the pressure of water, they are difficult to break, retain heat well, but have a high price. Acrylic is lightweight, strong, durable, but has a lot of flex, so make sure the pallet is well reinforced.

Step 9

Are you looking for a multifunctional cabin that combines hydromassage, Turkish bath, radio and telephone? Examine the installed injectors. How can they supply water, in what mode, is it possible to change the pressure of the water supply. The waterfall cab means 130 liters of water are poured over your head at a time. You will need to shut off the water drain and collect water in the sump. A built-in pump pumps water to the top of the cab and creates the coveted waterfall. Before purchasing such a model, check with the housing office for information about the water pressure in the pipes of the house, the permissible minimum is 1.5 barrels.

Step 10

Look at the top of the cockpit, if the cockpit has a built-in Turkish bath function, it should be closed. This is necessary so that the steam does not escape (the temperature reaches 40-45 degrees) and the required heating is maintained inside. It is good to have a seat, as you will have to spend at least 20 minutes in the cockpit to steam up. The fan disperses the steam, without it it will simply go up, as a result, the legs will be cold, and the head will be too hot.

Recommended: