How Is The Vapor Barrier Of A Steam Room Made Of Aluminum Foil Performed?

Table of contents:

How Is The Vapor Barrier Of A Steam Room Made Of Aluminum Foil Performed?
How Is The Vapor Barrier Of A Steam Room Made Of Aluminum Foil Performed?

Video: How Is The Vapor Barrier Of A Steam Room Made Of Aluminum Foil Performed?

Video: How Is The Vapor Barrier Of A Steam Room Made Of Aluminum Foil Performed?
Video: Sauna Foil Vapor Barrier 2024, March
Anonim

To build a bathhouse on your own site that will serve you faithfully for many years, you need to provide a comfortable temperature and normal humidity inside. For this, a reliable and effective vapor barrier should be created in the building.

How is the vapor barrier of a steam room made of aluminum foil performed?
How is the vapor barrier of a steam room made of aluminum foil performed?

The combined effect of steam and moisture, characteristic of a bath, has a detrimental effect on the building. A humid indoor environment contributes to the formation of a large amount of condensation, and also intensifies destructive processes in building structures and materials.

Why do you need a vapor barrier in the steam room

The steam room has the highest temperature and humidity, as well as the highest concentration of steam. With a carefully thought out and executed vapor barrier, it is possible to achieve an optimal ratio of temperature and humidity. Modern vapor barrier materials work in such a way that moisture and steam from the inside of the room cannot penetrate outside, and water from the external environment cannot penetrate inside. So the structure can be provided with a long service life, since the materials can be kept in good condition for a long time.

Among the modern materials popular for the device of vapor barrier, polypropylene laminated with foil is often used. It is resistant to both high temperatures and excess steam. Thanks to the implementation of vapor barrier with this material, accelerated heating of the room will be ensured, and heat losses will be reduced as much as possible, which will help maintain the optimal temperature inside the steam room.

Performing vapor barrier

In a steam room, it is better to start the vapor barrier device from the ceiling. The material is fastened under the sheathing using an ordinary construction stapler or nails are driven through the rail every one and a half to two centimeters. The vapor barrier is laid down with a foil layer. It is necessary to connect the material canvases end-to-end, using adhesive tape for this. It is imperative that there is an air space between the skin and the insulating material so that air can circulate freely there.

The older vapor barrier method is as follows. The ceiling from the attic side is sheathed with six-centimeter boards, aluminum foil is reinforced on top, then a layer of soft clay is arranged, and finally a layer of insulation.

The vapor barrier of the steam room walls is carried out in the same way. Competent conduct of vapor barrier measures will help create a comfortable atmosphere in the steam room, and the cost of materials will pay off very quickly by saving energy resources to maintain heat. Without proper arrangement of the room, heat will flow away through the walls.

Indoors with properly equipped insulation, not only a favorable microclimate is provided, but the surface cladding also receives additional protection, which helps the facing materials to retain their beautiful appearance for a longer time.

Recommended: