How To Connect A Washing Machine To Water

Table of contents:

How To Connect A Washing Machine To Water
How To Connect A Washing Machine To Water

Video: How To Connect A Washing Machine To Water

Video: How To Connect A Washing Machine To Water
Video: How to install a washing machine | Washing machine installation | How to plumb a washing machine 2024, March
Anonim

Buying an automatic washing machine involves installation work on its installation and connection to water supply, sewerage and electricity. This can be entrusted to professionals from the service, who will carry out the entire list of work in accordance with all installation rules and give a guarantee for their work or do the installation yourself, if you have at least the slightest experience or theoretical knowledge of the process.

How to connect a washing machine to water
How to connect a washing machine to water

Necessary

  • - adjustable double;
  • - FUM tape;
  • - tap;
  • - additional filter;
  • - hose, if the length of the hose from the manufacturer is not sufficient for installation.

Instructions

Step 1

To connect the washing machine to the water supply, buy an adjustable double or a Russian-made tee. You can also purchase a European-made tee. Shiny Chinese tees burst almost at the very first wash, unable to withstand the pressure of water in the water supply network.

Step 2

Additionally, purchase FUM tape and a hose of the required length if the hoses from the manufacturer are shorter than you need for installation. Never connect or lengthen the filling hose, as it will always be under pressure and no connections will hold up. You will also need a control tap and an additional filter if the water in your area is of disgusting quality.

Step 3

Make a tie-in to the plumbing system. To do this, close the central water supply in your apartment. If you do not have a tap to shut off the water supply, contact the housing department. You will be cut off in the basement of the house.

Step 4

Crash into the central pipe, cut a thread, screw on a tee or double, do not forget that all connections must be sealed with FUM tape. Screw the tap on the tee, and an additional filter on the tap. Connect the filling hose to the filter.

Step 5

Turn on the central water supply, set the washing machine to rinse mode, unscrew the control tap for water supply to the washing machine, check all the connections. If it leaks somewhere, drain the machine, tighten all connections.

Step 6

If your model of the washing machine provides for the function of connecting to hot water, then carry out the entire installation of the connection in accordance with the description of the connection to cold water supply. But usually no one connects hot water, since it is of disgusting quality in all regions, which leads to a quick breakdown of an expensive appliance, which is a washing machine. In addition, almost all automatic machines consume very little electricity to heat water, and there is no need to save additionally.

Recommended: