How To Insulate Walls In A Private House

Table of contents:

How To Insulate Walls In A Private House
How To Insulate Walls In A Private House

Video: How To Insulate Walls In A Private House

Video: How To Insulate Walls In A Private House
Video: How to Insulate Walls and Ceilings -- by Home Repair Tutor 2024, March
Anonim

Wall insulation in a private house is one of the most important procedures. After all, few people want to chatter their teeth from the cold, sitting in their own room. In addition, this procedure itself does not take much time and effort. However, despite this, not everyone knows how to properly insulate the walls of your house.

How to insulate walls in a private house
How to insulate walls in a private house

Instructions

Step 1

One of the most commonly used wall insulation technologies in your home today is the use of ordinary foam. You can insulate yourself with it in two ways. First, glue the material with assembly glue. This option is ideal for uneven surfaces as it helps to level them. The second is to fix the foam with special dowels. This option is used only on smooth and flat surfaces.

Step 2

If you decide to choose the first option, then go to the store for glue. It must be taken at the rate of 25 kg per 20 sq. m. plane. … Prepare the surface before starting work. To do this, prime it with deep penetration material. Let it dry - it will take you 2 hours.

Step 3

Dilute the glue with water according to the instructions. Pull the special construction cord vertically and horizontally. Thus, you need to measure the distance equal to the thickness of the foam. Start installing the insulation material. Place the glue on the foam sheet in five points - 4 at the edges, one in the middle. The size of these adhesive pads should be equal to the space that will remain between the foam and the wall of the house. It can be measured by a taut thread. Bring the polystyrene by the thread and, using gentle pressure, attach it to the wall. Glue the rest of the material in the same way. The main thing is to keep an eye on the joints - there should not be any gaps in them. Work one wall for one day. This is necessary so that the material adheres better to the surface and you can see where what needs to be corrected.

Step 4

The second option assumes that you put marks all over the wall, screw the guides along them. Then take a sheet of styrofoam and use the dowels to carefully screw it into these guides. Just don't be too zealous. Otherwise, you risk getting holes in the foam, or it will crack.

Step 5

You can insulate the walls this way. Attach the guides to the wall, lay insulating material between them. It will keep your home warm and also keep out unnecessary noise. From above it must be fixed with a sheet of chipboard. Place it gently on the guides and screw in with dowels. Now all that remains is to carry out the finishing work.

Recommended: