How To Make A Gable Roof

Table of contents:

How To Make A Gable Roof
How To Make A Gable Roof

Video: How To Make A Gable Roof

Video: How To Make A Gable Roof
Video: Gable Roof Erection Procedure 2024, March
Anonim

A gable roof is a structure of two even slopes with the same slope angle, which are directed downward. The slope angle is calculated depending on the abundance of winter precipitation in the form of snow in the region. If the winters are very snowy and large snow drifts are formed, then the angle of inclination should be made steep so that the snow does not linger.

How to make a gable roof
How to make a gable roof

Necessary

  • -beam or log
  • -tes
  • -laser level
  • - plumb line
  • -nails No. 200

Instructions

Step 1

After installing the walls, when making the ceiling, release the beams beyond the level of the end of the walls.

Step 2

On the released beams, nail the boards. Beams should be released to such a level from the walls, what distance you plan to make to protect the structure from precipitation.

Step 3

After building the floor, install the rafters. They can be made from dry timber or dry skinned logs.

Step 4

Install the first rafters exactly in the middle. Saw off the upper part of the rafters along the angle of the roof slope. To these rafters, you will attach the base for the ramps. You can make the angle of the slopes using an evenly exposed angle from lumber. Fasten the entire structure tightly with nails at least 200 in length. If the nails pierce through, then bend the protruding edges using a hammer.

Step 5

If the middle rafters are installed strictly in the middle of the ceiling, then the pitched rafters will be installed evenly. Therefore, check everything with a laser level. You need to check on all sides of the roof. Having installed the middle rafters, additionally check the evenness of the installation not only with a laser, but also with a plumb line.

Step 6

Install the rafters according to the angle of the ramp you are going to install.

Step 7

The entire rafter structure must be additionally secured with slopes. Secure the slopes with bars.

Step 8

Sew the gables on both sides with a plank so that there are no gaps. Design options are possible for sheathing. Some people install a herringbone-shaped board.

Step 9

On top of the slopes, install a sheathing made of planks and cover with roofing material.

Recommended: