How To Repair A Hole In A Bathtub

Table of contents:

How To Repair A Hole In A Bathtub
How To Repair A Hole In A Bathtub

Video: How To Repair A Hole In A Bathtub

Video: How To Repair A Hole In A Bathtub
Video: How to repair a rusty hole in your steel bathtub 2024, March
Anonim

Fortunately, penetrating damage in tubs is rare. Much more often you have to deal with scratches and chips of enamel. However, if a similar trouble with your bathroom does occur, do not be upset. Modern repair materials for bathtubs allow, if not completely get rid of the need to buy a new bathtub, then at least postpone this business for an indefinite period.

How to repair a hole in a bathtub
How to repair a hole in a bathtub

It is necessary

  • - drill with drill Ø2-3 mm;
  • - abrasive wheel;
  • - repair kit for cosmetic repair of acrylic bathtubs;
  • - repair kit for overhaul of acrylic bathtubs;
  • - sandpaper No. 100, 200, 400;
  • - universal putty (epoxy, "pe brulex", etc.);
  • - enamel for baths ("stakril", "epoxin", "tikkurila reaflex 50", etc.);
  • - reinforcing tape with fiberglass;
  • - alcohol.

Instructions

Step 1

Repair of through damage (cracks, holes) of acrylic bathtubs Drill holes with a diameter of 2-3 mm at the ends of the crack. This is done to prevent their further development. Clean the damaged area with 100 grit paper, degrease it with alcohol.

Step 2

Mix the resin from the repair kit for the overhaul of acrylic bathtubs with the hardener in the proportions indicated in the instructions. Apply a layer of resin to the repair area. Place a reinforcing material over the resin. Press it into the resin and apply a second layer of adhesive on top, ensuring that it penetrates the material and penetrates into all pores. Wait for the resin to harden. The waiting time is indicated in the instructions for the repair kits. In some of them it is required to perform the imposition of several layers of reinforcing material. Follow these requirements.

Step 3

After all layers have been applied and hardened, sand the repair site first with No. 200 sandpaper, then No. 400 sandpaper. Make sure that the treated surface is as flat and smooth as possible.

Step 4

Treat the surface of the repair with rubbing alcohol and apply polish from the acrylic bathtub cosmetic repair kit. Polish the repair area with a flannel.

Step 5

Repair of through holes in cast iron and steel baths If the hole in the cast iron bath looks like a crack, drill holes with a diameter of 2-3 mm in its ends with an electric drill. You don't have to do this in an iron bath.

Step 6

Work the damage with an electric drill with an abrasive wheel so that a crater-shaped funnel forms around the damage. The damaged area must be cleaned to bare metal. The larger the funnel chamfer and the flatter its edges, the better.

Step 7

Degrease the repair area with alcohol. Mix with the hardener a universal epoxy-based filler in the proportion indicated in the instructions. Apply the mixture to the edges of the damage. Apply fiberglass reinforcement tape to the damage, pressing it firmly to the surface. Apply another layer of putty over the tape. Give it time to harden a little. Repeat the operation with the application of the reinforcing tape again. When covering it with resin, try to keep the damaged surface just above the surrounding bath surfaces.

Step 8

After the resin has completely hardened, sand the damage first with # 100 sandpaper, then # 400 sandpaper. Try to ensure that the damaged surface is flush with the surrounding surface. Degrease it with alcohol and apply one of the bath enamels ("Stakril", "Epoxin", "Tikkurila Reaflex 50", etc.). Since the technology for applying enamels can be different, follow the instructions for a specific material.

Recommended: