How To Paint Antique Furniture

Table of contents:

How To Paint Antique Furniture
How To Paint Antique Furniture

Video: How To Paint Antique Furniture

Video: How To Paint Antique Furniture
Video: Creating a Rustic Aged look Painting Furniture with Chalk Paint 2024, March
Anonim

Antique painted furniture creates a feeling of comfort and peace. It is essential that the rest of the room is matched with your aged items. For staining and varnishing, use furniture made of natural wood or covered with veneer. Veneer is a fairly thin material and requires careful handling. Before you start aging large items, practice on a simple board or on an inconspicuous piece of furniture.

How to paint antique furniture
How to paint antique furniture

It is necessary

  • - wooden furniture;
  • - stain;
  • - fabric and cotton wool;
  • - varnish;
  • - brush or roller
  • - sandpaper;
  • - grinder;
  • - putty for wood;
  • - rubber spatula;
  • - screwdriver.

Instructions

Step 1

Prepare items for painting. Unscrew all removable parts from the furniture. If necessary, strengthen the loosened parts by tightening the screws or smearing with PVA glue.

Step 2

Remove the annoying finish from your piece of furniture. The old layer of varnish must be sanded off. For large furniture, use a sander, while small items can be sanded by hand. Use coarse sandpaper first, then fine sandpaper. If the furniture has been covered with paint, use a commercially available liquid or gel to remove the paint layer. Then go over the cleaned surface with a fine sandpaper.

Step 3

Prime only where the filler is required.

Step 4

Putty cracks and chips. Use a special wood filler. It is convenient to apply with a small rubber or plastic spatula. The color of the putty is important if you plan to cover the furniture with a very light stain, and if the stain is rich in color, then it is not necessary to select the putty to match.

Step 5

Choose the color of your choice. It can be aqueous or non-aqueous. The non-aqueous stain absorbs quickly into the wood and can leave streaks that must be shaded immediately with a swab or brush. Practice on a simple board before painting an item. If you don't have the skill, use a water-based stain. The color will be paler, but if you apply several layers of coating, then you will completely achieve the desired effect.

Step 6

Make a swab to apply the stain. Wrap ordinary cotton wool in a piece of cotton fabric. Pour the stain inside the swab so that it is damp, but the liquid should not flow when pressed. Cover the furniture with two to three coats of stain. Do not hold the tampon in one place, an ugly stain may appear that is difficult to remove.

Step 7

Sand the surface with sandpaper. Do this on corners, near locks, near handles, on a plane in several places. Simulate the scuffs that might occur with prolonged use of this piece of furniture.

Step 8

Cover the furniture with several coats of clear lacquer. Apply it with a roller or brush. If you are aging in a room, then use a water-based varnish, it is odorless. After a couple of layers, the furniture must be sanded again with fine-grained sandpaper to remove all raised wooden hairs and burrs.

Step 9

Apply a final two to three coats of varnish and let the piece dry completely.

Recommended: