How To Make A Stand For A Christmas Tree

Table of contents:

How To Make A Stand For A Christmas Tree
How To Make A Stand For A Christmas Tree

Video: How To Make A Stand For A Christmas Tree

Video: How To Make A Stand For A Christmas Tree
Video: Подставка для елки своими руками. Новогодний декор 2021. DIY Christmas Tree Stand Box 2024, March
Anonim

New Year's time is coming. This holiday is eagerly awaited by people of all ages and nationalities. They are waiting home for the New Year's beauty, which needs to be installed, dressed up and start celebrating the New Year in an absolutely New Year's atmosphere. But so that the tree does not fall, you need to make a reliable stand for it.

How to make a stand for a Christmas tree
How to make a stand for a Christmas tree

Instructions

If there are no ready-made boards, we cut them in the required quantity from one large board with a length of at least 160 cm.

How to make a stand for a Christmas tree
How to make a stand for a Christmas tree

We fasten or nail corners to each end of 20 cm boards. We fasten these boards with 40-centimeter ones (we attach two small ones to each larger board), retreating from each side by 5 cm. Leave a larger distance between the small boards - the stability of the structure will increase significantly, and then it will be easier to screw the bolts for furniture.

How to make a stand for a Christmas tree
How to make a stand for a Christmas tree

As a result, we have two "benches" that need to be combined. Drill a hole in the middle of the long boards. Better to do them with a slight offset up or down.

How to make a stand for a Christmas tree
How to make a stand for a Christmas tree

We make a hole in the trunk of the tree and connect it to our first bench using a furniture bolt. On the reverse side, we do the same, remembering to try on, so that both parts are parallel. Of course, instead of two bolts, you can use four for greater strength. But with two bolts, we have the ability to rotate the stand a little to keep it stable.

Recommended: