How To Clean Liquid Nails

Table of contents:

How To Clean Liquid Nails
How To Clean Liquid Nails

Video: How To Clean Liquid Nails

Video: How To Clean Liquid Nails
Video: Removing liquid nail with ease 2024, March
Anonim

Are the renovations nearing completion yet? There is only one little thing left: to wash everything and arrange the furniture. But sometimes this is not as easy as it might seem at first glance. It's good if you only need to wash the drops of water-based paint that have frozen on the floor, but if you need to clean the surface of liquid nails, you will have to break your head a little.

How to clean liquid nails
How to clean liquid nails

It is necessary

  • - instructions for the use of liquid nails
  • - rags;
  • - construction knife;
  • - acetone;
  • - hairdryer;
  • - removers.

Instructions

Step 1

Once again, carefully re-read the accompanying instructions from the manufacturer of liquid nails. Along with the conditions for the correct application of the product, you will find recommendations for removing liquid nails in it. That is, if you need to clean the surface of the glue, you can first of all use the manufacturer's advice.

Step 2

While studying the instructions, pay attention to the type of building glue you are using. There are two types of liquid nails: the first is based on a solvent, and the second is water-based. In most cases, when choosing one or another construction glue, they are guided by one important criterion - what will be glued with the help of liquid nails. Although water-based "nails" are environmentally friendly, they freeze at temperatures below five degrees. Solvent-based construction adhesive sets very quickly, but it is toxic and therefore harmful to human health. Knowing the exact type of liquid nails you are using will make it easier for you to understand than to clean them from the surface.

Step 3

If the drop that has dripped onto the floor or walls is still fresh (the building glue has not yet hardened), try wiping it off with a soft dry cloth. If liquid nails have already set, then in order to clean such a surface, for example, a floor or tile, first carefully scrape with a construction knife, then remove the remnants with a cloth moistened with acetone.

Step 4

Liquid nails can only be used in a strictly limited temperature regime, that is, they are afraid of extremely low and too high temperatures. In view of this, in order to clean the surface of construction glue, warm it up with a hair dryer, and then remove the “melted” nails with a rag, and rinse off the rest with a special remover.

Recommended: