How To Assemble A Bunk Bed

Table of contents:

How To Assemble A Bunk Bed
How To Assemble A Bunk Bed

Video: How To Assemble A Bunk Bed

Video: How To Assemble A Bunk Bed
Video: How To: Assemble an Upper Bunk Bed 2024, March
Anonim

An important element of a child's room is a bed. A bunk bed, which children really like, will allow you to save space. It can be equipped with boxes for bedding or toys, or supplemented with a slide, with which children can go down from the upper tier.

How to assemble a bunk bed
How to assemble a bunk bed

It is necessary

  • - Plywood panels;
  • - boards;
  • - wooden beams;
  • - wood glue;
  • - drill;
  • - self-tapping screws;
  • - bolts;
  • - hacksaw.

Instructions

Step 1

To assemble a bunk bed, you need to prepare two single mattresses with wooden boxes under them, support walls, sides to protect the child from falling out, a ladder and sides to hide the mattresses.

Step 2

For the support walls, take plywood boards and fill them with nitro varnish. You can also use wide boards or particle boards. With the height of the support wall one and a half meters, its thickness should be at least 2 cm. When choosing the width, be guided by the size of the boxes for the mattresses. Mark the attachment points of the mattresses on the support walls and drill the holes. Screw boxes or wooden frames with mattresses or standard crib nets to the supports with chrome-head bolts. If you prefer to make the supporting walls from two shields, then it is better to mount the fastening by screwing two bolts into each shield.

Step 3

If the mattresses do not have a box or wooden frame, a crate must be made between the side support pieces. Screw the wooden beams to the walls with self-tapping screws, and lay the boards on them. After making the lathing with connecting pins, fasten the sidewalls that will hide the mattresses. If you decide not to hide the mattresses, you can attach wood backing tiles.

Step 4

If the bed has solid backs, then it is advisable to install a removable ladder. To assemble it, attach a shield to the mattress box by connecting it with stick steps to the wall shield. For a bed with support walls made of two planks, it is best to arrange a ladder between these planks. Drill 4cm deep nests in them at a distance of 10cm from one another. Fill the nests with glue and fix the sticks with a diameter of 18mm in them, connecting the boards of the back.

Step 5

To make drawers, making measurements of the space under the bed, make appropriate blanks from plywood. Pull them together with self-tapping screws and attach wheels to the corners of each box.

Recommended: