How To Transform An Old Wardrobe

Table of contents:

How To Transform An Old Wardrobe
How To Transform An Old Wardrobe

Video: How To Transform An Old Wardrobe

Video: How To Transform An Old Wardrobe
Video: CHEAP TO CHIC EP.1| WARDROBE MAKEOVER| PAINT WOOD FURNITURE 2024, March
Anonim

Retro style is relevant in furniture fashion these days. Designer furniture in this style is very expensive. If you inherited an old wardrobe, then you are incredibly lucky. By upgrading it, you get a fancy wardrobe with only a small investment.

How to transform an old wardrobe
How to transform an old wardrobe

Instructions

Step 1

Prepare the surface before proceeding with the upgrade. Unscrew the fittings, remove the decorative overlays. Remove the old varnish from the surface with sandpaper. If there are dents on the surface, putty them. When the putty is dry, sand the surface with sandpaper.

Step 2

The easiest way to update your wardrobe is to paint the surface. Paint the doors, screw on the new handles, and the new cabinet is ready. If you can draw at least a little, paint the cabinet doors with fancy colors or geometric patterns.

Step 3

If you don't know how to draw, decoupage technique will come to the rescue. Purchase a decoupage card or layered napkins with matching patterns from the store. Spread the place where you will glue the napkin with PVA glue and glue the top layer. When the glue dries, cover the surface with furniture varnish, apply 2 or 3 coats.

Step 4

The back wall of the sideboard can be covered with wallpaper. Pick a wallpaper with an interesting pattern. Against such a background, the dishes will look very beautiful.

Step 5

Cover the old polished cabinet with self-adhesive tape. The store sells films of a wide variety of colors and textures. The doors of the wardrobe covered with foil can be decorated with special stickers. In addition, the workshop will help you apply the desired pattern to the film. You just need to choose a suitable photo and print it.

Step 6

Self-adhesive tape should be glued very carefully and carefully. Do not peel off the protective layer completely. Remove it a little and attach it to the surface to be pasted. With a soft cloth, smooth out the film from the middle to the corners, expelling air bubbles. Gradually peel off the protective layer and in the same way, glue the film. If, nevertheless, several air bubbles appear, pierce them with a fine needle and smooth them out. Take your time, do everything slowly, as rushing can ruin the whole work, and you will not be able to re-stick the film. Just like that, you can update your old wardrobe and give it a modern look.

Recommended: