How To Draw A Site Plan

Table of contents:

How To Draw A Site Plan
How To Draw A Site Plan

Video: How To Draw A Site Plan

Video: How To Draw A Site Plan
Video: How to draw a site plan 2024, March
Anonim

It is much easier and more convenient to make preliminary calculations and draw up projects on paper than on the site itself. By drawing a plan of your site, it will be easy for you to correct all possible mistakes. How should you draw a plan for a garden plot? There are several nuances.

How to draw a site plan
How to draw a site plan

It is necessary

  • - a measuring tape (preferably a tape measure),
  • - metal ruler (1, 8 m),
  • - pegs,
  • - graph paper,
  • - the tablet,
  • - pencils and eraser.

Instructions

Step 1

Draft drawing

Take measurements of the main elements of the site (paths, trees and bushes, garage, etc.) and write them down (you do not need to draw on the plan those elements that you do not need on the new site). Draw objects on the plan, simply by measuring the distance from them to the boundaries of the plot at right angles. If the area is not rectangular, simply pull the rope at right angles to the sides and measure as needed. Remember that the draft drawing should be as simple as possible, apply only basic measurements to it.

Step 2

Intermediate version of the drawing

Here you can give free rein to your imagination, just embody all your ideas on the sketch (while trying to keep the scale). Transfer your first sketch of the garden to drawing paper or graph paper (preferred). Thus, you will be able to extend the boundaries of your site, the size of all objects and the amount of building materials (bricks, stone blocks). Draw the boundaries of the future site, the house and everything that you want to leave from the previous site.

Step 3

If the area has a small area, the sketch can be drawn on a standard sheet of paper, if the area is large, then draw sketches of individual parts on several sheets, but make a general plan on a large sheet of graph paper. As for the scale, a scale of 1:50 is suitable for small areas; for areas of impressive size, choose a scale of 1: 100.

Step 4

Before you can get the final version, you will most likely have to draw more than one or two sketches. Try using tracing paper, overlaying it on top of the master plan and drawing on it, so you can try different options without spoiling the plan itself. Also try cutting out the main elements (keeping to the scale) and just move them around the plan, coming up with new combinations. However, after the necessary solution has been found, it is better to draw all the objects on the plan, otherwise the overall impression and the integrity of the sketch may be lost.

Recommended: