How To Hang Blinds On Windows

Table of contents:

How To Hang Blinds On Windows
How To Hang Blinds On Windows

Video: How To Hang Blinds On Windows

Video: How To Hang Blinds On Windows
Video: How to Install Blinds | Faux Wood Blinds | Inside Mount Window Blind Installation | MOORE APPROVED 2024, March
Anonim

Blinds are made of fabric, metal, plastic, wood. Vertical or horizontal plates help to reliably regulate air and light flows. Correct installation is a guarantee of flawless and reliable service over a long period of time.

How to hang blinds on windows
How to hang blinds on windows

Instructions

Step 1

Installation of blinds does not take much time, but you will need to observe certain details and take into account some nuances. You can install it in three ways: for each window sash separately, in the window opening, overlay. The options depend on the specifics of the design and window openings.

Step 2

Horizontal, vertical and roller blinds have a common mounting scheme. First take measurements according to the chosen method. To ensure that the blinds installed in the window opening do not touch the window sill and the sides of the opening itself, reduce 2 cm on each side when measuring. When installing overlay, add 5 cm on each side.

Step 3

When installing blinds on a window sash, the exact size of the sash will be the basis. Next, mark the mounts, observing the principle of symmetry. Attach the brackets to the marked plane, snap in the cornice. Make sure that the built-in fasteners will not interfere with the functioning of the shutters and pivot mechanisms of the windows. Install one additional mount on the side of the control cord. Fix all fasteners to the wall or ceiling with dowels and screws.

Step 4

After installing the fasteners, hang the cornice, attach slats and runners to it. To do this, connect the lower weights on the outside and inside. Check the operation of the blinds using the control mechanism.

Step 5

It is much more difficult to install blinds on plastic windows. Special care and precision are required, as well as tool handling skills. Therefore, it is better to entrust this work to professionals.

Recommended: