How To Dilute Epoxy Adhesive

Table of contents:

How To Dilute Epoxy Adhesive
How To Dilute Epoxy Adhesive

Video: How To Dilute Epoxy Adhesive

Video: How To Dilute Epoxy Adhesive
Video: Thinning Epoxy Tricks & Tips 2024, March
Anonim

If you have to make repairs to an apartment, a car, or restore damaged items made of metal, ceramics, wood, glass and many other materials, use epoxy glue that will successfully cope with these tasks.

How to dilute epoxy adhesive
How to dilute epoxy adhesive

It is necessary

  • - Capacities
  • - sticks
  • - latex gloves
  • - mask with carbon filter

Instructions

Step 1

Mix the epoxy by hand. If you use a power tool for these purposes, the adhesive can overheat and turn into stone under the influence of accelerated chemical reactions.

Step 2

Strictly observe the proportions of liquid and dry ingredients indicated by the manufacturer on the packaging. Also, do not deviate from the sequence described in the instructions for preparing the solution.

Step 3

If the adhesive is made up of hardener and resin in equal amounts, simply mix these ingredients together to make it. If the amount of each of the components of the glue needs to be measured, take a metal container, for example, a coffee can with graduations or applied circular divisions. Each of these divisions should be equal in volume to a glass. If you have to mix large volumes, then prepare the measuring ruler yourself, marking the divisions on it.

Step 4

Before mixing the ingredients together, stir each of them with a clean stick in separate containers. At the same time, use your own clean stick for each solution so that the contents of one container do not accidentally fall into another. Otherwise, the setting process will begin, which can no longer be stopped.

Step 5

After mixing the individual liquids, pour them into the prepared mixing container. Stir well and start adding dry filler in small portions little by little. If the mixture is too dry, dilute with liquid ingredients mixed in a separate container.

Step 6

When working with epoxy glue, be sure to take precautions: ensure that the room is well ventilated, put on a mask with a charcoal filter, follow the instructions for safe handling on the packaging or label. Since the adhesive is difficult to remove from the skin, wear rubber gloves when preparing and handling the adhesive.

Recommended: