How To Remove Fungus In An Apartment

Table of contents:

How To Remove Fungus In An Apartment
How To Remove Fungus In An Apartment

Video: How To Remove Fungus In An Apartment

Video: How To Remove Fungus In An Apartment
Video: How to Get Rid of Mold | The Home Depot 2024, March
Anonim

Mold spores are constantly nearby. They float in the air, settle in the form of dust on furnishings and wait only for an opportunity to start growing. It is worth breaking the humidity level in the apartment, making mistakes when installing the ventilation system, and the fungus will instantly begin to multiply on suitable surfaces. Paper, wood, plaster - blue and black mold stains grow quickly and easily on any surface in your apartment.

How to remove fungus in an apartment
How to remove fungus in an apartment

It is necessary

  • - putty knife;
  • - hard brush;
  • - roller;
  • - building hair dryer;
  • - composition for removing traces of cement and plaster;
  • - antiseptic solution;
  • - acrylate antiseptic soil;
  • - universal soil;
  • - waterproofing solution;
  • - plaster;
  • - putty;
  • - heat insulating paint.

Instructions

Step 1

Start work only during dry and warm seasons. Dry the area to be treated thoroughly. Use a building hair dryer or fan heater for this.

Step 2

Remove the decorative coating from the wall: wallpaper, decorative plaster, wall panels.

Step 3

Molds are very fond of living in plaster. They pierce it with their mycelium and destroy it. Therefore, the plaster from the areas affected by the fungus will have to be removed completely with a spatula or stiff brush. Do not be afraid of difficulties, the affected plaster is looser and easily crumbles after drying.

Step 4

Treat the wall with a special compound to remove traces of cement and plaster. This will help remove even traces of the affected mortar and open up the pores of the brick for better drying. Dry the surface thoroughly again. The more thoroughly you clean the surface, the less chance of new fungal growth.

Step 5

Dilute mold remover in water. Apply it with a roller, not only to the affected area, but also to the entire wall. Antiseptic solutions offered for sale help to fight not only molds, but also algae, mosses, lichens and many pathogens of bacterial infections.

Step 6

Apply acrylate antiseptic primer to the wall. This will remove dust from the surface and increase the adhesion of the plaster or mortar.

Step 7

Apply the waterproofing mortar to the walls with a roller or wide brush. This will help further protect the plaster from fungus and dampness.

Step 8

Prime the wall with any universal primer and apply a layer of plaster. After the plaster has dried, paint it with insulating paint.

Step 9

After that, the wall must be putty and once again apply a layer of universal primer.

Step 10

Only now is the wall ready to be decorated with a decorative coating or wallpaper.

Recommended: