How To Make A Sliding Gate

Table of contents:

How To Make A Sliding Gate
How To Make A Sliding Gate

Video: How To Make A Sliding Gate

Video: How To Make A Sliding Gate
Video: Sliding gate -How to make a sliding gate 2024, March
Anonim

Sliding (sliding) gates do not take up much space, therefore they are ideal for installation in small areas. They are resistant to mechanical stress, are not afraid of wind gusts, and are adapted to any weather conditions.

How to make a sliding gate
How to make a sliding gate

It is necessary

  • - concrete;
  • - fittings;
  • - level;
  • - pipes 20x20;
  • - pipes 60x40;
  • - bearings;
  • - retractable carriage;
  • - door leaf;
  • - siding.

Instructions

Step 1

Equip a sliding gate foundation. To do this, dig a trench (the optimal size is 1.5x1.5x0.5 m).

Step 2

To strengthen the foundation, lay metal reinforcement in it, and then fill it with concrete. You can purchase ready-made concrete or prepare the solution yourself. The foundation must be strong - the service life of the sliding gate depends on it. Therefore, experts do not recommend saving on the quality and quantity of building material.

Step 3

After the foundation has stood, proceed with the installation of the gate base. The design itself is not complicated, so you can make a sliding gate yourself. The support beam is the main element of the door. You can buy it in the market or in a specialty store, or you can cook it yourself. This will require two 20x20 pipes, one above the other.

Step 4

Leave a small distance between the pipes of the support beam and weld pieces of a similar pipe into it. This will protect the structure from deflections and other deformations. Equip the beam from the inside with support carriages and install at the base of the door. Now fix the carriages to the foundation so that the same distance is maintained between the mechanisms.

Step 5

Make a sliding gate frame from metal pipes with a diameter of 60x40. Connect them together with horizontal jumpers. Secure the frame to the support beam. The length of the frame itself, as a rule, is one third longer than the dimensions of the opening.

Step 6

Now install the door leaf on the rollers, which are equipped with the vertical frame posts. Check the functionality of the mechanism.

Recommended: