How To Open An Intercom Without A Chip

Table of contents:

How To Open An Intercom Without A Chip
How To Open An Intercom Without A Chip

Video: How To Open An Intercom Without A Chip

Video: How To Open An Intercom Without A Chip
Video: Коды для домофонов, взлом домофона, как открыть домофон без ключа 2024, March
Anonim

You can get access to the doorphone programming mode by typing the password on the keyboard. After that, the person who dialed the code is able to open the door with the intercom without any chip. Service codes of intercoms are set by the manufacturer and are the same for all models. Installers, as a rule, do not change these codes. If the service code is nevertheless changed, contact your installer to open it.

How to open an intercom without a chip
How to open an intercom without a chip

Instructions

Step 1

To open the "Barrier" type intercom for models 2 and 2M, enter the opening code 1013. By the way, it cannot be changed even by the service department. In addition, all models open with two small magnets when you slide them over the chip application area. The exception is the "Barrier-4" type intercom. It does not have a service opening code, and the number of magnets in the chip is 3.

Step 2

To open the VIZIT intercom, try the standard codes * # 4230 or 12 # 345. Latest models may have the code * # 423 or 67 # 890. If this does not help, enter the service menu using the code # 999, wait for two short beeps and enter the master code 1234. If the intercom has already been opened, the beep will be single. If the master code is incorrect, the sound will be two-tone. In addition, master codes can be of the form 6767, 3535, 9999, 0000, 12345, 11639. Then, to open the door, enter a two, after a pause, a hash and after another pause, 3535.

Step 3

To open the CYFRAL intercom, if there are apartments with a number divisible by 100 at the entrance, press the call button, and then the apartment number, which is a multiple of 100. After that, press the exit button again and enter the master code 2323, 7272 or 7273. For modifications CYFRAL- M try pressing the call key and entering 41 or 1410. In rare cases, the door opens when you enter the combination 07054.

Step 4

To open the CCD-2094M intercom, dial 0000 and press the call button. The display should show COD. After that, enter the master code 123456, 456999 or 123400 and press the button to call the apartment. If everything is done correctly, after 5 seconds the inscription F0 will appear on the screen and you will only have to enter the opening code 601.

Step 5

To open the CCD-2094.1M intercom, press the call button and enter 0000. In this case, either the door will open immediately, or you will enter the service menu. In the second case, the display will light up the inscription ON and you will only have to press the number 2. If the inscription OFF lights up, it means that the access codes have been changed.

Step 6

To open the door with the ELTIS intercom, press the call button, then enter the number 100, then the call button again and then the master code 7273 or 2323. If this option did not work, try to open it similarly to the CYFRAL and CCD intercoms.

Step 7

Open the METAKOM intercom using the following method: press the call button, then the number of the first apartment in the entrance and again the call button. After COD appears on the screen, enter the combination 5702. Some models can be opened by dialing 65535 + call key + 1234 + call key + 8 or 1234+ call key + 6 + call key + 4568.

Step 8

Open the METAKOM MK-20 M / T model using the combination: call key + 27 + call key + 5702. A combination may also work: call key + 1 + call key + 4526. To enter the programming mode, bring the chip without firmware to the reader.

Step 9

Open the RAINMANN 2000 intercom by pressing the button with the key icon followed by entering the code 987654. After the double beep, enter the combination 123456. The letter P should be displayed on the screen. Now, to open the door, press the eight.

Step 10

To open the door with a DOMOGUARD brand intercom, press the C button and after the beep, quickly enter the service code 669900 + the call button + the number of the apartment next to the last one in the entrance. After the message F appears on the screen, enter the code 080.

Step 11

To open the T-GUARD doorphone, press the call key, then enter five zeros and press the call key twice again. It is important that all clicks, especially the last two, be done very quickly.

Step 12

When opening the FACTORIAL intercom, enter a combination of six zeros or 123456. These are standard service codes, but in most cases they are changed during installation. If so, press and hold button 5 until a service message appears on the display. Then enter 180180 + call button + 4 + call button.

Step 13

BLINK single-user audio intercom does not have service codes. Take a Krona or Korund battery or any other battery that complies with the European standard 6F22. Under the bottom panel, locate the bolts that match the battery connector exactly and attach it to these bolts.

Recommended: