How To Make A Brazier With Your Own Hands From Bricks

Table of contents:

How To Make A Brazier With Your Own Hands From Bricks
How To Make A Brazier With Your Own Hands From Bricks

Video: How To Make A Brazier With Your Own Hands From Bricks

Video: How To Make A Brazier With Your Own Hands From Bricks
Video: Cottage with your own hands. Barbecue made of bricks. 2024, March
Anonim

Usually, barbecues made of wrought iron or commercial collapsible ones are used. A brick brazier is a structure, the construction of which must be approached responsibly. It is necessary to have at least some experience in bricklaying and an idea of / u200b / u200bthe construction of stoves, at least brief. If you are not ready to make a complex structure, then it is better to involve specialists in this field.

How to make a brazier with your own hands from bricks
How to make a brazier with your own hands from bricks

It is necessary

  • - sand;
  • - cement;
  • - gravel;
  • - crushed stone;
  • - refractory brick;
  • - clay;
  • - grate bars;
  • - pipe;
  • - material for finishing;
  • - material for the canopy.

Instructions

Step 1

As with any brick laying, a foundation should be installed for the barbecue device, because without it the brick will lead and it will give deep cracks, which will make it impossible to further use the barbecue without repair.

Step 2

For the foundation, dig a pit 40-50 cm deep. It needs to be made a little wider than the future barbecue.

Step 3

Fill the bottom of the pit with sand, a layer of gravel on it and compact everything tightly. The formwork should be installed 15-20 cm above the soil level.

Step 4

Fill the foundation with concrete and let the cement harden for 4-7 days before carrying out the next work. It takes at least 28-30 days until the fortress is fully accumulated.

Step 5

Next comes the installation of refractory bricks in one or two rows. This will be the base of the barbecue.

Step 6

Be sure to lay out a blower below for better wood burning.

Step 7

All stoves are placed in a clay solution. Cement mortar is not used for laying stoves.

Step 8

Lay out the firebox itself and install a grate in it, on which you will put coals for frying kebabs.

Step 9

The width and length of the entire structure should be made to fit your skewers.

Step 10

Install brick columns above the firebox, on which you will install a smoke exhaust pipe. An iron pipe should be installed on the columns or brickwork should be continued.

Step 11

You can finish the built barbecue at your discretion.

Step 12

A canopy should be made over the barbecue to protect the structure from precipitation.

Step 13

A simpler and more temporary type of brick barbecue is simply laying bricks on four sides according to the size of skewers. Between the brick on both sides, gaps are left for the flow of oxygen, without which combustion is impossible.

Step 14

Install an impromptu barbecue on a flat surface, free of turf and grill kebabs without any special construction tricks.

Recommended: