How To Connect A Gas Hob

Table of contents:

How To Connect A Gas Hob
How To Connect A Gas Hob

Video: How To Connect A Gas Hob

Video: How To Connect A Gas Hob
Video: How to install your AEG Gas Hob - Worktop installation 2024, March
Anonim

At first glance, a gas hob is a very simple device, there is nothing complicated in connecting it, but in fact it turns out that everything is not so simple. The installation of the gas surface must be carried out in compliance with technical safety standards, in accordance with the instructions attached to it. When connecting this device to the gas pipeline, you must be very careful and careful, because a gas leak can lead to sad consequences.

How to connect a gas hob
How to connect a gas hob

It is necessary

Gas hose, two adjustable wrenches, since threaded connections are used, and a special gas winding

Instructions

Step 1

To connect the gas hob, you will definitely need a special hose; special attention should be paid to its choice, because your safety will depend on it. Hoses are selphonic (they look like corrugated metal) and in a metal braid (with yellow risks), you can also purchase special rubber gas hoses (these are of the same color). The gas hose must be certified (the certificate is present with the purchase), it is advisable to buy it in a specialized store.

Step 2

Unpack the gas hob and inspect it for mechanical damage. If everything is normal, then using adjustable wrenches, connect the gas hose to the valve, which is installed in the gas pipeline (gas inlet valve). To avoid leaks in the connection, use a special gas winding.

Step 3

Now connect the gas hose to the hob. Please note that there may be two outputs on it - one for connecting to a gas cylinder, and the other to a gas pipeline. Using the instructions, specify which outlet you need to use and connect the gas hose to it.

Step 4

After you have connected the gas hob to the gas main, open the gas inlet tap and apply soap solution to all connections. If there is no movement of the film, then everything is in order, you can check the operation of the panel itself. Open the burner and wait a couple of seconds for the air to escape, then light it. Test all hotplates one at a time. Place the hob horizontally, level so that your pots and pans do not slide off it.

Recommended: