How To Assemble A Meat Grinder

Table of contents:

How To Assemble A Meat Grinder
How To Assemble A Meat Grinder

Video: How To Assemble A Meat Grinder

Video: How To Assemble A Meat Grinder
Video: How to assemble a meat grinder 2024, March
Anonim

Experienced chefs believe that real minced meat can be cooked only in a manual meat grinder from the second half of the 20th century. Many have such cast-iron devices lying around at home, and if you are going to use this wonderful kitchen assistant, it will not be superfluous to learn how to properly assemble a meat grinder.

How to assemble a meat grinder
How to assemble a meat grinder

Instructions

Step 1

The classic meat grinder, which was in every Soviet family, consists of a body with a meat receiver, auger shaft, a knife, a grate, a locking cover and a handle with a locking screw.

Step 2

The assembly of the meat grinder should be started by installing the auger shaft inside the body. On one side, the shaft has a thickened end, on which the meat grinder handle is put on. Insert the shaft with this end into the housing so that it protrudes from the outside. To improve the operation of the meat grinder, lubricate with a drop of sunflower oil the place where the auger shaft touches the body.

Step 3

Now you need to put a knife on the shaft. Inspect the knife, which may be in the shape of a cross or a two-blade propeller, and slide it flat side out onto the auger shaft. If you turn it in the opposite direction, then the meat will not scroll.

Step 4

Place the grate on top of the knife and fix the structure with the latch cover, which is screwed along the thread on the body. The meat grinder is assembled. Now it can be fixed on the table with a clamp, which is mounted in the body of the meat grinder and, putting on the handle, start scrolling the meat.

Recommended: